Tuesday, April 13. 2010
The close-up here of the Apollo 15 landing site (26.1°N 3.6°E) is a portion of one of several LROC narrow angle camera (NAC) images that show the site (see earlier released image). Although near the edge of the NAC image M111578606LE, this close-up (about 391 meters across, at 52 cm/pixel) shows many pieces of hardware left on the surface by the Apollo 15 astronauts, including of interest here the Apollo 15 lunar Laser Ranging RetroReflector (LRRR) array. It was placed on the Moon by astronaut David Scott on 1971 July 31. A photograph of a portion of the LRRR taken by Scott is shown below. The Apollo 15 array is one of four usable such arrays on the Moon. The others are at the Apollo 11 and Apollo 14 sites, and on the Lunokhod 2 rover (see here for information on Lunokhod 2).
Finding your position on the Moon can be tricky. Since the 17th century, the Moon's coordinates have been measured in what is now known as the “mean Earth/polar axis system,” or ME system for short. This is a latitude and longitude system where the mean (average) direction of the Earth over time defines the 0° longitude, or prime meridian, and the average direction of the Moon’s polar axis defines 90° north and south latitude. However, in order to effectively use such a system, it is necessary to assign latitude and longitude to a set of points on the Moon. This is where the LRRR arrays come in. Over the years since they were emplaced on the Moon, lunar laser ranging (LLR) observations of these arrays from several sites on the Earth have been processed and the relative positions of these arrays determined to the centimeter level. These relative coordinates have been converted to absolute latitude and longitude coordinates according to the above definition of the ME system, and thus are now the points on the Moon whose positions are most accurately known.
However, for the general purpose of locating things on the Moon, knowing the positions of only four points is not particularly useful. Therefore an important step in being able to use the data being returned from the LRO mission, as well as from previous U. S. and international missions, is to connect those datasets to the LLR coordinates. For LRO, a first step will be to determine the coordinates of LROC images and digital elevation models (DEMs) (see here) covering the LRRR sites). A second step will be to compare the positions of LRO Lunar Orbiter Laser Altimeter (LOLA) data to these images and DEMs in order to make sure that the global LOLA dataset is connected to these coordinates. The final step will be to assure that all other LROC and eventually even past U.S. and international mission data are in the same LLR coordinate frame. This will assure that lunar datasets will be in the same coordinate frame and that such data can be used together, consistently, for human exploration planning and associated science activities.
For more information on connecting lunar datasets together, read this 2010 Lunar and Planetary Science Conference abstract.
Explore the rest of the Apollo 15 landing site area!